Stainless Steel 904L Pipe Fittings Supplier, Exporter

1.4539 Butt weld Pipe Fittings, SS 904L Weldable Butt weld Fittings, Stainless Steel 904L Pipe Fittings, Stainless Steel 904L Butt weld Fittings Manufacturer in Mumbai, Stainless Steel 904L Butt weld Pipe Fittings, SS 904L Butt weld Pipe Fittings, UNS N08904 Pipe Fittings, UNS N08904 Buttweld Fittings,904L SS Seamless Pipe Fittings, 904L Stainless Steel Buttweld Fittings in India.

20%
VISION

50%
MISSION

98%
QUALITY

ASTM A403 Stainless Steel 904L Buttweld Tee Exporter, Stainless Steel 904L Pipe Cap, Stainless Steel 904L Buttweld Pipe Elbow, Stainless Steel 904L Reducer, Stainless Steel 904L Buttweld Fittings Supplier in Mumbai India.

Stanley Alloy is a prominent supplier and distributor of SS 904L Butt Weld Fittings. We have been producing these products for many years and have gained decades of working experience and control management that has enhanced the production of these fittings. We make and produce the following effects based on national and international quality standards and norms only, and mostly get appreciated from our esteemed clients.

SS 904L Buttweld Fittings is an austenitic stainless steel with lower or least carbon content in the material’s composition. SS 904L has high copper content in the range of 23-28%, nickel of about 4-5%, less than 2% manganese, up to 2% molybdenum and less than 1% small elements such as silicon and phosphorus to stabilize chemical balance. This non-magnetic grade has much higher corrosion resistance from crevice corrosion and protects the material from carbide precipitation. This is commonly utilized in various applications due to the addition of a minor amount of molybdenum and nickel and can also be replaced with low-cost duplex stainless steel. This grade can be performed using all conventional methods and does not require post-weld and pre-heat treatments. Type 904L can be utilized under many conditions depending upon the environmental situation. It can be machined during cold working and should be carried out under conditions where fabrications under stress corrosion cracking environments are performed.

SS 904L Butt Weld Fittings has various applications in many industries, including petrochemical processing, heat-treating equipment. Pharmaceutical equipment, paper and pulp industries, chemical processing, oil and gas industries, etc.

Specification of Stainless Steel Buttweld Pipe Fittings

Specifications: ASTM A403 / ASME SA403

Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Type : Seamless / Welded / Fabricated

Items : Seamless & Welded Pipe Fittings, 45 Deg & 90 Deg Butt weld Elbow, Pipe Tee, Cross, Reducer, Pipe End Cap, Swage Nipple etc.

Grade : SS 904L

Available Types of Stainless Steel 904L Butt weld Fittings

Buttweld Elbow

ASTM A403 SS 904L Seamless Buttweld Elbow, ANSI B16.9 SS UNS N08904 Pipe Elbow, SUS 904L 90 degree Buttweld Elbow Supplier, SS 45 Deg. Buttweld Elbow, SS 1.4539 Welded Pipe Elbow Exporter.

Buttweld Reducer

ASTM A403 SS 904L Buttweld Pipe Reducer, ANSI B16.9 SS UNS N08904 Reducer, SUS 904L Eccentric Reducer Supplier, SS Concentric Reducers, SS 1.4539 Buttweld Reducer Exporter.

Buttweld Tee

ASTM A403 SS 904L Buttweld Tee, ANSI B16.9 SS UNS N08904 Equal Tee, SUS 904L Buttweld Unequal Tee Supplier, SS Buttweld Reducing Tee, SS 1.4539 Buttweld Pipe Tee Exporter.

Buttweld Cross

ASTM A403 SS 904L Buttweld Cross, ANSI B16.9 SS UNS N08904 Equal Cross, SUS 904L Buttweld Unequal Cross Supplier, SS Buttweld Reducing Cross, SS 1.4539 Buttweld Cross Exporter.

Buttweld Stub End

ASTM A403 SS 904L Buttweld Stub End, ANSI B16.9 SS UNS N08904 Long Stub End, SUS 904L Buttweld Stub End Supplier, SS Buttweld Short Stub End SS 1.4539 Buttweld Lap Joint Stub End Exporter.

Buttweld Pipe Cap

ASTM A403 SS 904L Buttweld Cap, ANSI B16.9 SS UNS N08904 Pipe Cap, SUS 904L Buttweld End Pipe Cap Supplier, SS Buttweld End Cap, SS 1.4539 Pipe Cap Exporter.

Buttweld Bend

ASTM A403 SS 904L Buttweld Bend, ANSI B16.9 SS UNS N08904 Pipe Bend, SUS 904L Buttweld Piggable Bend Supplier, SS Long Radius Bend, SS 1.4539 U Bend Exporter.

Seamless Fittings

ASTM A403 SS 904L Seamless Pipe Fittings, ANSI B16.9 SS UNS N08904 Seamless Pipe Fittings, SUS 904L Seamless Pipe Fittings Supplier, SS Seamless Pipe Fittings, SS 1.4539 Seamless Pipe Fittings Exporter.

Welded Fittings

ASTM A403 SS 904L Welded Pipe Fittings, ANSI B16.9 SS UNS N08904 Welded Pipe Fittings, SUS 904L Welded Pipe Fittings Supplier, SS Welded Pipe Fittings, SS 1.4539 Welded Pipe Fittings Exporter.

Equivalent Grades of Stainless Steel 904L Butt weld Fittings

STANDARD	WERKSTOFF NR.	UNS
SS 904L	1.4539	N08904

Chemical Composition of Stainless Steel 904L Butt weld Fittings

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Cu
SS 904L	0.020 max	2.00 max	1.00 max	0.040 max	0.030 max	19.00 – 23.00	4.00 – 5.00 max	23.00 – 28.00	1.00 – 2.00

Stainless Steel 904L Butt weld Fittings Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.95 g/cm3	1350 °C (2460 °F)	Psi – 71000 , MPa – 490	Psi – 32000 , MPa – 220	35 %

Stainless Steel 904L Pipe Fittings Make

Saudi Aramco Make Stainless Steel 904L Pipe Fittings

QALCO Make Stainless Steel 904L Buttweld Fittings

SPIE Oil & Gas Services Doha LLC Make Stainless Steel 904L Pipe Fittings

GASCO Make Stainless Steel 904L Buttweld Pipe Fittings

Descon Engineering Make Stainless Steel 904L Pipe Fittings

ORPIC Make Stainless Steel 904L Buttweld Fittings

Kuwait National Petroleum Company Make Stainless Steel 904L Pipe Fittings

Bahrain Petroleum Company (Bapco) Make Stainless Steel 904L Pipe Fittings

Oman United Engineering Services LLC Make Stainless Steel 904L Pipe Fittings

Petrofac Make Stainless Steel 904L Buttweld Pipe Fittings

Peninsular Petrotech Engineering Make Stainless Steel 904L Buttweld Fittings

Hidayath Group Make Stainless Steel 904L Butt weld Fittings

People also search about Stainless Steel 904L Buttweld fittings

904l stainless steel elbow dimensions, stainless steel 904l industrial pipe fittings dealer, stainless steel 904s13 pipe fittings suppliers, schedule 10 ss 904l fittings, ss 904l 90° sr elbow, stainless steel 904l reducing nipple,stainless steel 904l weldable pipe fittings, astm a403 904l stainless steel pipe fittings, stainless steel 904l buttweld elbow price, inox 1.4539 pipe fittings, ss 904l pipe fittings manufacturer in mumbai, 904l ss elbow, ss 904l pipe fittings manufacturer, stainless steel 904l pipe fittings manufacturers in india, 904l stainless steel 3d elbow, ss 904s13 elbow 90 deg, asme sa403 stainless steel 904l pipe nipple, ss x1nicrmocu25-20-5 schedule 40 pipe fittings, ss 904l din equivalent buttweld fittings, stainless steel 904l 180 deg bend, ss 904l pipe fittings price list, 904l stainless steel astm a403 fittings price list in mumbai, stainless steel 904l welded pipe elbow, ss astm a403 wp 904l swage nipple, 904l stainless steel pipe fittings manufacturers in mumbai.